# 「德州快速門」堆積門電機速比越大越快嗎？

「德州快速門」堆積門電機速比越大越快嗎？

Does the motor speed ratio of the Texas Express Gate stacking door increase faster?

Regarding the speed reducer selected by the fast door motor, we usually use the RV63, 1:15 speed reducer.

Why not use 1:10, because the output torque becomes smaller, the speed is too high, and it is easy to burn the motor.

Speed faster than 10 is equivalent to second gear, slower than 15 is equivalent to first gear, second gear is faster, first gear is slower, first gear is more powerful. Some doors can't move, just change a speed ratio reducer, but the speed is slower, 15 can't move 20 and 30.

「德州快速門」堆積門電機速比越大越快嗎？

Does the motor speed ratio of the Texas Express Gate stacking door increase faster?

Speed ratio is derived by dividing the rated speed of your motor by the actual speed. It means that the rated speed of your motor is 1400 rpm and the speed ratio is 10.

Then the actual speed of your motor is 140 rpm. The higher the speed ratio, the lower the speed and the greater the output force.

The speed ratio of the reducer (also known as the transmission ratio) is the rated speed of your motor divided by the actual speed. Computing method:

Setting: The rated power of the motor is P (kw), the speed is N1 (r/min), the total transmission ratio of the reducer is i, and the transmission efficiency is u. Then: output torque = 9550*P*u*i/n1 (N.m)

1、定義計算方法：減速比=輸入轉速÷輸出轉速。

1. Define calculation method: deceleration ratio = input speed_output speed.

2、通用計算方法：減速比=使用扭矩÷9550÷電機功率電機功率輸入轉數÷使用系數,MB無級變速機的使用注意事項。

2. General calculation method: deceleration ratio = use torque_9550_motor power input speed_use coefficient, MB CVT use precautions.

3、齒輪系計算方法：減速比=從動齒輪齒數÷主動齒輪齒數（如果是多級齒輪減速

3. Gear system calculation method: deceleration ratio = number of driven gear teeth, number of active gear teeth (if multi-stage gear deceleration)

Then the number of driven gear teeth of all pairs of meshing gears is equal to the number of active gear teeth, and then the result is multiplied, NRV reducer.

4、皮帶、鏈條及摩擦輪減速比計算方法：減速比=從動輪直徑÷主動輪直徑,螺旋齒輪減速機,擺線針輪減速機如何加潤滑油。

4. Calculating method of belt, chain and friction wheel deceleration ratio: deceleration ratio = driven wheel diameter_drive wheel diameter, helical gear reducer, cycloid pinwheel reducer how to add lubricant.

ustomers, if you have the purchase and maintenance needs of fast door motors, reducers and other accessories, please call 13940183063.

a片免费看